Views:8 Author:Site Editor Publish Time: 2019-07-21 Origin:Site
IFAN Flexible PEX tube is manufactured by extrusion, and shipped and stored on spools, where rigid plastic or metal piping must be cut to some practical length for shipping and storage. This leads to several advantages, including lower shipping and handling costs due to decreased weight and improved storage options.
IFAN PEX plumbing installations require fewer fittings than rigid piping. The flexible tubing can turn 90 degree corners without the need for elbow fittings, and IFAN PEX tubing unrolled from spools can be installed in long runs without the need for coupling fittings.
Attaching IFAN PEX tube to fittings does not require soldering, and so eliminates the health hazards involved with lead-based solder and acid fluxes; IFAN PEX is also safer to install since a torch is not needed to make connections.
IFAN PEX resists the scale build-up common with copper pipe, and does not pit or corrode when exposed to acidic water.
IFAN PEX is much more resistant to freeze-breakage than copper or rigid plastic pipe.
IFAN PEX tubing does not transfer heat as readily as copper, and so conserves energy.
Water flows more quietly through IFAN PEX tube, and the characteristic "water hammer" noise of copper pipe systems is virtually eliminated.
PEX plumbing installations cost less because:
PEX is less expensive than copper pipe.
Less time is spent running pipe and installing fittings than with rigid pipe systems.
Installing fewer fittings reduces the chances for expensive callbacks.